Boot up. Before the system enters the normal working condition, it is necessary to start the heating system, raise the temperature of the heating box to the set value and keep the temperature constant, so that the plastic sheet can be heated and softened within the predetermined time through the heating box.
Feeding. The function of the feeding member is to draw the sheet which is wound on the drum so that the feed chain rail smoothly grips the sheet and feeds forward. Feeding motor can be through the upper and lower two proximity switches, contactors to achieve automatic start or stop.
Send the film. The function of the feeding part is to send the sheet according to the set speed, length and other parameters to the heating box, forming mold and punching parts to complete the various processing processes. Send the machine for the Yaskawa servo motor, its speed and direction are required to set parameters, and through the PLC to control the start and stop. At the same time, send the film is the first automatic cycle of the work of the first action.
FROM:杭州方圆塑机
上一条: EPS machine-shape molding machine
下一条: EPS batch pre-expander
中文
English